How to install HD Deep Well Borehole Camera V13-BCS？

Welcome to the installation video for the V13-BCS 200m HD Borehole Camera with manual reel.This video will guide you through the setup process, ensuring you can efficiently and effectively use your new inspection tool.

1. Unboxing:

   • Begin by carefully unpacking the V13-BCS and its components. Ensure you have the camera, control unit, display, and any accessories included in the package.

2. Install the camera storage box to the cable reel

3. Install manual reel handle 
4. Install cable to cable reel and connect 45mm dual view camera head 

5.  Connect link cables:

   • 1pc meter counter link cable, 1pc signal link cable, two cables are labeled with different signs. Straight connection to the control box, elbow connection to the cable reel.
6.  Wireless Keyboard: 
   • Take out the USB adaptor from the back of the keyboard, insert it into the “Keyboard” port of the control box, load 2 pcs #7 batteries.            
   • If you can't typewrite the words,please press F8, the cursor is displayed.   
   • F8: Display the words          F9: Hiden the words   F10: Clear all words
7.  Press the “Power On” button to turn on the system

8. Testing the System:

   • Before beginning inspections, power on the system and test the camera’s pan and tilt functions using the control interface. Verify that the image is clear on the display.

9. Recording the video

   • Insert the factory-configured USB flash drive into the “USB” port.

10. Ready for Use:

    • Once everything is set up and tested, your V13-BCS is ready for use. Review safety precautions and best practices for inspecting deep wells.

 Thank you for watching the installation video for the V13-BCS HD Borehole Camera. If you have any questions or require further assistance, please refer to the user manual or contact our support team.

For more information about our products, visit www.szvicam.com  email us: pipecamera@szvicam.com